EPOXY COATINGS

They are high performance coatings for protection of metal, steel and concrete. They are available in Primers, High Build and Finish state. They are basically two-pack products: Pack A (Base) and B (Hardener).

  1. Epoxy Primer: this is used directly on the metal after blasting (surface preparation) to pre-vent rust.

Features: Non toxic, a two-coat to improve adhesion, can be used in normal

and chemical environments. Superior resistance to moisture, corrosion and rust.

  1. Epoxy High Build:

This is the conventional high build used on suitably primed steel. It provides excellent pro-tection in demanding environments such as fresh and salt water, oxidizing acids, alkalis and oils.

Features: Excellent resistance to corrosion, abrasion and chemical attack.

Gives a high dry film of above 100 microns. Resistance to bacterial attack. Ex-hibit long-term protection.

  1. Epoxy Ultra High Build: High performance, higher film build, long term protective coating which requires no top coat for excellent performance.

Features:Excellent adhesion Chemical resistance Abrasion resistance Low temperature cure

Long lasting protective effect and a build of over 350 microns.

  1. Epoxy Finish: A two pack polyamide cured epoxy coating. Resistance to corrosion, chemi-cals and heat up to 150˚C. It gives a tough and durable finish. They are used on suitably primed steel or on concrete for floor.

Features:       Corrosion and chemical resistance Decorate and protect substrate

Resist grease, oil and many other substances that would have ruined an or-dinary painted finish. It can be used on steel, concrete, garage floor, asbes-tos, bricks, chemical plants, vessels, and refineries.

  1. Acrylic Polyurethane: A two-pack top coat. It offers excellent UV protection, gloss reten-tion, abrasion resistance and compatible with epoxy. Even after prolonged exposure, the film remains flexible and beautiful.

Features:Excellent colour and gloss retention

A smooth finish to a variety of substrates.

Typical use: New construction and maintenance in chemical and industrial environment.

Fabricated tanks, pipelines, machineries, handrails, gates, concrete and wood.

  1. Marine Coating/Alkyd Gloss: A single pack high quality decorative finish based on alkyd. It is designed for easy application.

Features:Good gloss Easy application

Reasonably cheaper than Epoxy and Polyurethane finishes Available in Gloss and Matt finishes.

Typical Use: General steel work and concrete.

  1. Bright Aluminium: A premium quality, bright luster aluminium paint for interior or exterior use. It can be used where the temperature is up to 200˚C.

Feature:Bright leafing appearance Easy application

Typical use: Iron, Steel, Aluminium, Wood and galvanized metal.

  1. Road Marking: A universal chlorinated rubber based coating, suitable for application on roads. It provides visual guidance to road users particularly at night. It is usually non-bleeding. It is available in reflective and non-reflective form.

Features:High build, good coverage, fast drying, non-skid, abrasion Resistance, good adhesion, can withstand water and Fluctuating humidity, non chalking non yellowing.

Typical use: Asphalt, Concrete, Bricks, Runways, Iron helipad, Steel, and Sport facilities.